Solar Panel fsfs
Specification:
Type: Semi-Finished DIY Solar Panel
Material:Monocrystalline Silicon
Cell Grade: Grade A
Efficiency: 21%
Pmax: 5W
Vpmax: 1V
Ipmax: 5A
Lamination (top to bottom): ETFE+PTFE+2xEVA+Cell+2xEVA+PET
Flexible: No
Foldable: No
Panel Size: 170x170x3mm
Package Material: EPE Foam Bag
Package Size: 200x250mm
Gross Weight: 130G
Color: Dark Blue
Instruction:
1.This DIY panel is designed as 1V, 1.5V and 2V.
2.On the back the positive and negative anodes is mark as “+” & “-”.
3.Connect them in series to get the voltage added.
4.Connect them in parallel to get the current added.
5.Example: If you buy some 2V panel and wanna DIY a 18V panel, just connect 9pcs 2V panel in series.
Tools Required:
1.Welding Wire: To connect the pole
2.Welding Wire: To melt the wire
3.Waterproof Glue: To fill the gap to prevent water penetration
4.5V Regulator: Necessary for 5V devices charging
5.Diode: Necessary for storage battery charging to prevent reverse charging.
Note:
1.Please find out the positive and negative pole before use.
2.This is a DIY panel, if you know nothing about solar panel and electricity, please don`t buy it.
Tips on If the “+” & “-” mark is lost:
Use a multimeter to find them out:
1.Adjust it to the DC Voltage mode
2.Connected the red and black stylus to the anodes
3.If the multimeter show a positive reading, then the red stylus side is the positive pole and the other is the negative pole.
Package Included:
1 x solar panel
Package Included:
1 x solar panel
Solar Panel fsfs See detail
