JHEMCU GHVTX-5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 25mm*25mm 3g for RC Drone Eachine Tyro99

JHEMCU GHVTX-5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 25mm*25mm 3g for RC Drone Eachine Tyro99
JHEMCU GHVTX-5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 25mm*25mm 3g for RC Drone Eachine Tyro99 JHEMCU GHVTX-5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 25mm*25mm 3g for RC Drone Eachine Tyro99 JHEMCU GHVTX-5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 25mm*25mm 3g for RC Drone Eachine Tyro99



JHEMCU GHVTX-5840 FPV Transmitter
5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX 
Support OSD 
25mm*25mm 3g Ultra Small Light for RC Drones Eachine Tyro99
 
 
FIG GHVTX-5840 series is a 5.8G ISM band pass analog image transmission, having a stable output power, transmission distance, strong power filter, to ensure that the image without snow at full throttle, and so no stripes. Using stackable mounting, design M3 screw hole of 25.5 * 25.5MM. The image transmission supports IRC OSD tuning, while retaining the key function, 5 levels of power can be adjusted.
 
Features:
Fast 5-speed power switching, independent two red indicator lights, indicating the current transmit power 25/200/400/800 / 1000MW.
The frequency point uses 6 LEDs to display 40 channel values.
Support OSD tuning.
Powerful power chip, input up to 27V, output 5V / 2A low ripple, small interference
the antenna power is not installed, it will not pass burn FIG.
light weight: 3.6g (not including the antenna and cable plug).
 
Performance:
Input voltage: DC 7V-27V (2-6S)
Output voltage: DC 5V 2A
Power switching: 5th gear 25MW, 200MW, 400MW, 800MW, 1000MW
Signal channels: 40
Frequency point switch: manual key / IRC OSD (also supports)
Antenna Interface: IPEX
Dimensions: 40MM * 40MM Pitch: 25.5 * 25.5MM, M3
 
Overall introduction
+ 5V GND VIDEO
Camera power supply (5V)
VIN GND
Input power supply (7-27V)
RXD
Flight controller sends IRCOSD serially
LED indication: L1-L6 channels, P1-P2 power
 
Frequency adjustment
Manual adjustment:
FR button Switches channels, 6 LEDs indicate channels. Default channel 5865
 
Power switching
POW button Power adjustment. The default shipment is 25MW.
 
Package Included 
1 x VTX
1 x Antenna
1 x JST-SH 1.0mm 6P AV Cable Wire
2 x Cable Ties
 












JHEMCU GHVTX-5840 FPV Transmitter 5.8Ghz 25mW/200mW/400mW/800mW/1W High Power VTX Support OSD 25mm*25mm 3g for RC Drone Eachine Tyro99 See detail


Popular Posts